G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 219 / 228

Status LEDs
100 · G&D DL-DVI-Vision-IP
Status LEDs
The LEDs on both the front and the back panel of the computer module and the
console module let you control the operational status of the KVM extender at any
time.
Meaning of the LEDs on the front panel
Area LED Color Status Meaning
Ident. Ident. blue on On as soon as the LED has been activated
via web application.
Power Red. green on The optional power pack is connected and
supplies voltage of 12 Volt.
off The optional power pack is not (properly)
connected.
Main green on The power pack is switched on and sup-
plies the required voltage.
off The power pack is switched off or a con-
nection to the power network could not
be established.
Status K/M green on The keyboard has been detected.
blinking No keyboard connected or keyboard could
not be detected.
System green on Device is ready for operation.
blinking Executing update.
fast
blinking Device is reset to default settings after
pushing the Reset button for a long time.
red on Internal error
Video yellow on A stable video signal has been detected at
the video input.
off The incoming video signal could not be
detected or its quality is not good enough
to be processed.
Pairing yellow on The connection to the remote station has
been established.
off The connection to the remote station
could not be established.