G&D ControlCenter-IP-XS, Руководство по установке

Страница: 42 / 56

Initial configuration of the network settings
12 · G&D ControlCenter-IP-XS
Initial configuration of the
network settings
A basic requirement to access the web application is to configure the network set-
tings of the IP matrix switch on which the web application is operated.
How to configure the network settings before integrating the device into the local
network:
1. Use a category 5e (or better) twisted pair cable to connect the network interface
of any computer to the device’s
Network
interface.
2. Ensure that the IP address of the computer’s network interface is part of the sub-
net to which the device’s IP address belongs to.
3. Switch on the device.
4. Start the computer’s web browser and enter the URL https://192.168.0.1 in the
address bar.
5. Enter the following data in the login mask:
6. Click on
Login
.
NOTE: In the defaults, the following settings are pre-selected:
 IP address of network interface A : 192.168.0.1
 global network settings: settings obtained using DHCP
NOTE: Use the IP address 192.168.0.100 , for example.
Username: Enter a username.
Password: Enter a password for your user account.
IMPORTANT: Change the administrator account's default password.
To do this, log into the web application with the administrator account and
then change the password.
The
default
access data to the administrator account are:

Username: Admin

Password:
see
login
information on the label on the bottom of the device