Gamry ECM8, Руководство оператора

Страница: 13 / 46

Chapter 1 -- Safety Considerations--Ventilation
1 - 5
8) Make sure you have not inadvertently changed the AC line voltage setting, which is displayed in a
small window on the AC input module. If the voltage shown is not the appropriate setting for the
line voltage in your area, change it before powering up your ECM8.
Warning
The AC line fuses are important components for safe operation of the
ECM8. Do not replace the fuses with incorrect values or types or in
any way circumvent the fuse action. If your ECM8 routinely blows
the AC line fuses it indicates a serious problem with the ECM8.
Contact Gamry Instruments, Inc., for repair information.
Ventilation
Your ECM8 Electrochemical Multiplexer was designed to operate at ambient temperatures between 0  C
and 40  C.
Be careful when operating the ECM8 in an enclosed space (such as an enclosed relay rack or NEMA
enclosure). The temperature within the enclosure must not exceed 40  C. You may need to provide
ventilation holes or even forced air cooling for the enclosure if excessive temperature rise occurs.
Defects and Abnormal Stresses
You should treat your ECM8 Electrochemical Multiplexer as potentially hazardous if any of the following is
true of the unit:
• It shows visible damage.
• It does not operate properly.
• It has been stored for a long period of time under unfavorable conditions.
• It has been dropped or subjected to severe transport stress.
• It has been subjected to environmental stress (corrosive atmosphere, fire, etc.).
Do not use your ECM8 or any other apparatus if you think it could be hazardous. Have it checked by
qualified service personnel.
Note that there are limit conditions on the storage, shipping and operation of this equipment. The ECM8
has not been designed for outdoor use.
Storage
Ambient Temperature -20  C to 60  C
Relative Humidity Maximum 90% non-condensing
Shipping
Same as storage plus
Acceleration Maximum 30 G
Operation
Ambient Temperature 10  C to 40  C
Relative Humidity Maximum 90% non-condensing