1.
Introduction and Setup
Congratulations on your purchase of our Starburst PixBar! The Starburst PixBar fea-
tures RGBW LED’s in a 18x10w configuration with full pixel control of each LED at a
great price!
Unpacking
After receiving the Starburst Pixbar, please check whether any visible damage was
caused during transport. lf the power cord, housing or the light are damaged, do not
operate the device. Contact your dealer or GAMMA LED Vision immediately.
Thank you for choosing our Starburst PixBar. It uses high power Red, Green, Blue,
White, Amber, and UV LED’s for, low power consumption, high brightness, and excel-
lent colors. The Starburst PixBar features DMX512 control, standalone, and sound-
active modes.
For your own safety, please read this manual before installing or using the device. This
manual covers the important information on installation and applications. Please install
and operate the fixture with following instructions. Meanwhile, please keep this manual
for future needs.
In the Box:
Starburst PixBar 18x10w LED - 1 pc
PowerCon Power Cable -
1 pc
DMX Cable: 3 Pin
-
1 pc
Mounting and Operation
Use clamps rated for the full weight of the Starburst PixBar to hang the fixture from the
mount(s) on the fixture’s feet.
As an added safety measure be sure to attached at least one properly rated safety
cable to the fixture using one of the safety cable foot attachment points as a safety
point.
Safety Precautions
Caution: For added protection mount the fixtures in areas outside walking paths, seat-
ing areas, or in areas were the fixture might be reached by unauthorized personnel.
Starburst Pixbar – GAMMA LED Vision
Page 3 of 14
