Gamma Progression ES II+, Руководство пользователя

Страница: 8 / 16

STRINGING THE FRAME
Clamp Base Operation
Rotate the Base Locking Lever clockwise to
secure the clamp base to the turntable.
Reverse the clamping procedure to unlock
the string clamp. The Locking Lever is spring
loaded to assist the unlocking of the clamp
base.
The Locking Lever should be tightened
enough to prevent clamp base slippage on
the turntable, when the desired tension is
placed on the string. To go from the loose
position to the clamped position and back,
generally requires the rotation permitted by
the slot in th clamp base. If the rotation is not sufficient to allow smooth operation of, adjust
the Clamp Base Locking Nut as outlined below.
Note:
If the string slips in the string clamp while tensioning, adjust the gap between the clamp
jaws as per the following instructions.
Clamp Head Operation
“
Quick Action
”
Clamps are of a dual
action design where as the clamp head and
clamp base operate independently of one
another.
To clamp a string, lift the clamp head and
place the string between the jaws and de-
press the clamp head lever to secure the
string. The clamping pressure applied to the
string should be adjusted to provide suffi-
cient pressure to secure the string when
subjected to the desired pulling tension. The
diamond coated gripper plates provide for
increased friction between the clamps and the string to allow for reduced clamping pressure
while securing and holding the string under tension.