Gamma Progression 200 Скачать руководство пользователя страница 2

2

200

MP200-10 OWNER’S MANUAL

LIMITED LIFETIME WARRANTY

GAMMA Sports (GAMMA) warrants to the original purchaser that the Progression 200 stringing machine (“EQUIPMENT”) 
purchased is free from defects in materials and workmanship for life of the EQUIPMENT. Should any defects develop under 
normal use, GAMMA will at its option, repair or replace the defective EQUIPMENT provided it is returned to GAMMA prepaid 
at the purchaser’s expense. This warranty does not apply to any damage or defect caused by negligence, abuse, misuse, 
unauthorized alteration, shipping, handling, or part wear and tear as a result of normal use.

Routine maintenance, adjustment, and cleaning required to ensure proper operation are the responsibility of the purchaser 
and are not covered under the terms of this warranty.  These include, but are not limited to: String Clamp adjustment, as 
described on page 4

.

GAMMA’s obligation under this warranty is limited to repair or replacement of defective EQUIPMENT, and no one is authorized 
to promise any other liability. GAMMA shall in no event be liable for any incidental or consequential damages.

To return defective EQUIPMENT, a return authorization (RA#) must be obtained from a GAMMA customer service represen-
tative by calling 800-333-0337. The RA# must be marked on the outside of the shipping carton being returned. All returns 
must be shipped prepaid by the customer to GAMMA. Please retain the original shipping carton and packing materials for 
any future shipments. GAMMA will not be responsible for machines which are not sent in the original undamaged packaging.

TABLE OF CONTENTS

WARRANTY ................................................................................................ PAGE  2

FEATURES.................................................................................................. PAGE 3

ASSEMBLY INSTRUCTIONS ..................................................................... PAGE 4

MOUNTING THE FRAME ........................................................................... PAGE 6

STRINGING THE FRAME ........................................................................... PAGE 8

PATHFINDER AWL .................................................................................... PAGE 10

MAINTENANCE & ADJUSTMENT ............................................................ PAGE 11

TROUBLE SHOOTING TIPS .................................................................... PAGE 12

NOTES ...................................................................................................... PAGE  13

PARTS LIST .............................................................................................  PAGE 14

PARTS DRAWING..................................................................................... PAGE 15

Содержание Progression 200

















Отзывы: