3. Maintenance
Routine Maintenance
The cleaning of lens must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: damp, smokey, or
particularly dirty surrounding can cause greater accumulation of dirt on the fixture’s
optics.
• Clean with a damp, soft cloth..
• Always dry the parts carefully.
• Clean the external optics at least every 20 days in demanding environments.
Troubleshooting Problems
The following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work:
•
Check that the unit is plugged in to a working power connector.
•
Press the menu button to confirm that the unit is powered on. If the screen does
not light up, the unit has no power.
B. Not Responding to the DMX Controller
•
Check DMX cables to verify that they are plugged in and functional.
•
Check the DMX address and mode – does it match the address and mode patched
in the lighting console or software?
•
Plug the light directly into the DMX controller with a cable that you know is good.
Unplug all other lights – does it work?
•
Try to use another DMX controller.
Nano Beam – GAMMA LED Vision
Page 12 of 13
