SUPPORTS - pag. SU 11
Oxygen bottle holder (SMALL or LARGE)
ATTENTION:
For a correct and safe usage of the oxygen bottle holder with COMPACT it is
necessary to read carefully the text contained in sections “INFORMATION” (from
pag. IN 1
) and “BODY” (from pag. BO 1) of the usage instructions.
The oxygen bottle holder must be placed in the special space on the body of the
trolley (see lay-out on pag. SU 1).
IT IS STRICTLY FORBIDDEN TO ASSEMBLE THIS ACCESSORY IN PRESENCE OF
THE POWER PACK.
Failure to observe the prescriptions and the procedures described in this
document absolves the manufacturer of any responsibility for damages to things
or people.
Function
This accessory
shall be used to store an
additional oxygen bottle.
Features
Each of the two types of
bottle
holders
can
bear
oxygen bottles with a specific
diameter and capacity:
SMALL: 2-5 l of capacity;
100mm of diameter;
LARGE: 3-10l of capacity;
150mm of diameter.
Assembly
1
Make the upper hole
2
Drill the lower part of the body in
correspondence with the three pre-set
points
3
Lay the plate on the body of the trolley
and screw up the upper fixing screw
4
From the inside of the body, insert the
stop nut of the screw.
continued
