Figure 14. Ethernet setup screen
9.13.
TSP sublimation view
First text line indicates current TSP status. Here ‘TSP 1 OFF’.
Second text line indicates current TSP configuration as defined in the TSP
Setup window.
Third text line indicates currently active TSP filament. This is the filament
that will be sublimated.
Available TSP status:
‘TSP Initializing’ - TSP is initializing.
‘TSP OFF’ - TSP is off.
‘TSP ON’ - TSP is currently sublimating.
‘TSP Armed’ - TSP is running programmed mode, but not currently
sublimating TSP filament.
‘TSP Armed, Supply is off’ - TSP cannot continue because pressure window is
set, but supply is off.
‘TSP Armed, Outside the pressure window’ - TSP cannot continue because
pressure window is set, but pump pressure is outside the pressure window.
‘TSP Armed, Interlock - Active’ - TSP cannot continue because TSP interlock is
set, but not satisfied.
‘TSP Armed, Waiting – In use’ - TSP cannot continue because other TSP is
currently running the sublimation cycle.
Page 28
900031_J
900031_J - Touchscreen user interface
