12
ADDITIONAL FEATURES
Turntable Brake
The turntable may be locked in any position.
Rotate the lever to the right to lock the turn-
table and to the left to release the turntable.
Badminton Shoulder Support Protec-
tion Pad Installation
Slide the badminton shoulder support cover
over the shoulder supports. There is no need
to remove the tennis shoulder supports.
Note:
An optional badminton frame support
for the head of the racquet is available.
9
STRINGING THE FRAME
Clamp Base Operation
To lock the string clamp base to the turntable,
rotate the clamp base locking lever clockwise.
To release the string clamp base from the
turntable, rotate the clamp base locking lever
counter-clockwise.
The Locking Lever should be tightened
enough to prevent clamp base slippage on
the turntable, when the desired tension is
placed on the string. To go from the loose
position to the clamped position and back,
generally requires the rotation permitted by
the slot in the clamp base.
String Clamp Operation
The string c
lamps are a dual action design
where the string clamp and clamp base oper-
ate independently of one another.
To clamp a string, lift the clamp head and
place the string between the jaws and de-
press the string clamp lever to secure the
string. The clamping pressure applied to the
string should be adjusted to provide suf
fi
cient
pressure to secure the string when subjected
to the desired pulling tension. The diamond
coated gripper plates provide for increased
friction between the clamps and the string
to allow for reduced clamping pressure while securing and holding the string under tension.
Getting Started
To begin stringing the main strings, thread
the two ends of the string through the two
center holes at the appropriate end of the
frame and continue through the opposite
center holes. Thread one end of the string
through the adjacent grommet hole and pull
excess by hand.
Secure one of the strings using a string clamp.
