7. Use Guide
7.1 The scale should be levelly placed. Though the scale has good protection, it is
suggested to use in clean and stable condition.
7.2 While weighing, place the load in the center of the platform as far as possible.
7.3 Never use high corrosive solvent to clean it.
7.4 Don't weigh (tare included) exceeds its Max. Capacity plus 9e ("e" refers to division),
when the weight exceed the value, the indicator displays FULL.
7.5 Never over-load it. Don't place weighing goods on the scale platform for a long
period of time. Never bump the platform with weighing goods; otherwise the load cell
shall be damaged.
7.6 Be sure that AC power plug is properly grounded.
7.7 Don't disassemble it without authorization.
7.8 If the display don't change while loading, or don't respond after pressing [OFF] with
AC power switch off. At this time, turn off the battery switch and after a moment turn on
the switch again, and then press [ON] to start again. That assures the reset of CPU after
power off.
7.9 Turn off power supply and pull off its power plug at once if it is out of order.
Unprofessional staff can't fix it without authorization; Contact our sales agent in local
area for help.
7.10 If recalibrate is needed, do it after the scale warms up on for 30 minutes.
NOTICE
GMC-2XX Serial Digital Desktop Weighing Scale and the manual may change without
further notice. For service, please contact your location provider.
<END>
- 5 -
