Gamma Led Vision SPEKTRA FRESNEL 300W LED, Руководство пользователя

Страница: 3 / 10

1. Product Introduction
1.1. Product Feature
Ø
2 kinds of running model
n External control mode (Slave model)
u DMX 512 controller control(2 kinds channel modes)
u Master/salve model control (auto match the signal from controller and the Master light, no need to
set by menu)
n
static mode (Master model)
u It can fix any color without the controller ,also work this color with strobe
Ø Non-linear dimmer and linear dimmer
n The speed of dimmer can be set under the controller control
Ø Screen Protect
n
It will enter blank screen without any operate on the keyboard in 30 seconds . Press any keys then it can
quit screen protection.
Ø Temperature Protection
n It can be set to temperature protection mode
Ø Speed of the Fan
n
The fan will start to work when the working temperature reach 40 degree, and the speed will be changed
according to the change of temperature.
Ø Can be Reverse display
1.2. Multi-light working in the same time
When using controller to control multi lights to work in strobe, the controller just send the channel data . The
strobe effect will be depend on each light itself . And please take attention for the follow situation:
1.
There will be many situations make the lights are not synchronization in the beginning. (For example: the
different time of opening the light , or different time of them connect to the controller) .In this case, you can
change value of the controller( for example push 20 to 0, and back to 20), then it can be synchronization.
2. Due to crystal frequency of different lights are not the same exactly, so it may not be synchronization after
long time.
3. If need to keep synchronization for long time, there are two ways to do so:
A. Using the controller to edit program make the strobe, auto run effect,then they must be synchronization.
B. Using the Maser/Slave model