EN
Gametrix JetSeat User Guide
2
2.
ASSEMBLY & INSTALLATION INSTRUCTIONS
A.
ATTACH THE PAD TO THE CHAIR
Gaming vibration pad should be attached to the chair with soft
padding. Fastening of the pad is possible with up to three
straps.
The rear and upper belts are fastened as shown in the
figure. The lower belt is clasped underneath the chair to hold
the seat.
Then make sure that the straps aren‘t releasing and
the pad is not sliding from the surface of the chair.
B.
CONNECT THE AC/DC POWER ADAPTER
Plug the AC adapter into the round mating connector (smaller) of the
gaming vibration pad. It is necessary to put the power plug firmly into
the socket for a reliable fixation. Then plug the power adapter into an
electrical outlet.
C.
PLUG THE CONTROLLER
Connect the controller‘s round connector (larger size)
to the mating connector of gaming vibration pad, and
then connect it to a USB port on your computer. Turn
the switch (
5 - see description on the next page
) to
"ON". Wait 1-2 minutes, while Windows installs a
device driver.