Gametrix JetSeat, Руководство пользователя

Страница: 15 / 34

15
tip #1
If your Gametrix JetSeat (or Air) device suddenly looks dead, you should try to
reload its firmware by yourselves, following this simple procedure. It takes
about 5 minutes or less.
1. Download Firmware Loader from Gametrix web-site, unzip it somewhere;
2. download Firmware file from Gametrix web-site, unrar it to the same
folder;
3. unplug the device USB;
4. switch off the device power;
5. plug in the device USB;
6. press and hold buttons MODE and MOTORS;
7. switch on the device power (at the very first time Windows discovers a
new device);
8. release buttons;
9. wait until drivers for new device installed;
10. start FirmwareLoader.exe;
11. load firmware into device by pressing the button with a red arrow "Об-
новить";
12. unplug the device USB;
13. switch off the device power;
14. plug in the device USB;
15. switch on power and check if the device works.
Thanks StorkNet for teaching me the procedure.
tip #2
During OnceClick application installation or update process antiviral software
(Symantec Endpoint Protection, Dr.Web, etc.) may block files download. They
shouldn't, but they do. In such case we recommend temporarily switch off pro-
tection.
tip #3
You can use JetSeat in sound mode with any game. That's simple as 1-2-3.
1. Plug JetSeat's 3.5 mm male jack into soundcard output as if it was a
Butckicker;
2. plug headset into JetSeat's 3.5 mm female jack;
3. press and hold MODE button at JetSeat's control unit for 3 seconds. LED
color changes. That's it.
Adjust vibration level by rotating big black knob at control unit or via