THE MOTOR SYNTH CURRENTLY HAS TWO PLAY MODES -
“FREE MODE”
AND
“ARP MODE”
.
TOGGLE DIFFERENT PLAY MODES BY PRESSING THE
“PLAY MODE”
ENCODER ON THE INSTRUMENT'S FRONT PANEL.
NEW PLAY MODES SUCH AS SEQUENCER MODE, DELAY MODE, CHORD MODE, DRONE MODE AND OTHERS WILL BE UNLOCKED IN
FUTURE VERSIONS OF THE MOTOR SYNTH FIRMWARE.
PRESS THE
“PLAY MODE”
ENCODER
TO ACCESS THE
<ARP SETTINGS>
MENU.
USE THE BUTTONS AND
“CTRL”
ENCODER TO CONFIGURE
THE ARPEGGIATION ENGINE.
THE MOTOR SYNTH'S ARPEGGIATOR ENGINE CAN BE ASSIGNED TO BOTH VOICES
INDIVIDUALLY VIA THE
”PLAY MODE”
ENCODER.
ADJUST ARPEGGIATION PARAMETERS THROUGH THE
<ARP SETTINGS>
MENU:
MODE
TIME DIV
GATE LENGTH
SWING
NOTE REPEAT
NOTE SHIFT
PATT REPEAT
PATT SHIFT
<SETS THE ARP TYPE - UP, DOWN, INCL, EXCL, ORDER,
RANDOM AND OTHER MODES>
<SETS THE ARP’S SUBDIVISION AGAINST THE MAIN BPM>
<SETS HOW MANY TIMES EACH NOTE IS REPEATED>
<REPEATED NOTES CAN BE SHIFTED BY AN INTERVAL>
<SETS HOW MANY TIMES EACH PATTERN IS REPEATED>
<REPEATED PATTERNS CAN BE SHIFTED BY AN INTERVAL>
MIDI IN AND MIDI OUT
USB-B CONNECTOR FOR TRANSFERRING DATA TO THE MOTOR SYNTH'S MEMORY CARD (FIRMWARE UPDATES, MOTOR
FIRMWARE UPDATES, PRESETS, NOTE-BANKS).
MICRO-SD MEMORY CARD SLOT IS LOCATED ON THE INSTRUMENT'S RIGHT SIDE-PANEL.
24V DC (CENTER POSITIVE) POWER SUPPLY PLUG.
3 CV INPUTS AND 3 TRIGGER INPUTS - ASSIGNABLE TO ANY PARAMETER THROUGH THE MOTOR SYNTH'S MAIN MENU.
2 STEREO SEND/RETURN OUTPUTS FOR SENDING VOICE 1 AND VOICE 2 (PRE-FILTER) THROUGH EXTERNAL
DEVICES / EFFECTS UNITS.
HEADPHONE OUT (3.5 MM, STEREO).
AUDIO OUT (1/4', MONO).
¼ JACK INPUT FOR: SIGNAL THROUGH (PRE OR POST FILTER), AND MULTIPLE UPCOMING FUNCTIONS (RELEASED IN
FUTURE FIRMWARE VERSIONS - INCLUDING VOCODER, TEMPO DETECT, SIDECHAIN INPUT, AND MORE).
Содержание Motor Synth
Страница 3: ......
