Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT
7
4. Attach the roof (2) to the quad-pod and roof frame by
draping it over the top of the assembled frame and adjust
until the corners are lined up with the roof poles. SEE
FIGURE 4.
Begin securing it by attaching the bottom edge to the
shooting rail by wrapping the hook and loop strips around
it. SEE FIGURE 4A.
Next, attach the center of the roof to the roof poles where
they intersect in the middle with the hook and loop strip.
SEE FIGURE 4B.
Then, attach each corner of the roof to each corner of the
roof poles by wrapping the hook and loop strips around
the roof poles near each corner bend. SEE FIGURE 4C.
Lastly, tension the roof by wrapping the five d-ring straps
around the shooting rail and pulling tight. SEE FIGURE
4D.
NOTE: Do not over tension. Only take the slack out of the
panel.
STEP 4
FIGURE 4
2
FIGURE 4A
FIGURE 4C
FIGURE 4B
FIGURE 4D
