background image

Installation Instructions

29

STEP 9:

 With two (2) other adults holding the base of the 

ladder stand, steady against tree (refer to Figure 22), 

climb to a height that allows you to safety attach your full-

body fall arrest harness tether to the tree trunk as soon as 

possible. After your tether has been attached to the tree 

trunk securing your position, attach the ratchet strap (#24) 

to secure the top of the stand to the tree. To install the 

ratchet strap (#24), wrap the ratchet strap around the tree 

trunk and attach hook to the opposite side on the seating 

platform frame as shown in Figure 23. Make sure the 

ratchet strap is very tight. Repeat this for the lower ratchet 

strap (#24) by attaching it to back of shelf support frame. 

NOTE: For ratchet threading instructions, refer to Figure 

24. NEVER ATTEMPT TO THREAD A RATCHET ABOVE 

GROUND LEVEL.

WARNING! Prior to attempting to climb a ladder stand for the first time, make certain the feet of the 

bottom rung ladder section are firmly planted on solid, level ground. If they are not firmly planted on 

level ground, DO NOT climb the ladder. With three (3) adults, lower the stand and find a suitable 

location to safety install the ladder stand. Failure to follow these instructions may result in serious 

injury or death! 
WARNING! When climbing to secure the ratchet straps, always have two (2) adults hold base of 

ladder steady against tree.  Always lean forward when climbing to keep the stand centered and 

secure to the tree trunk. DO NOT lean backwards when climbing! Failure to follow these 

instructions may result in serious injury or death! 
WARNING! When climbing, always maintain three points of contact as you ascend (climb up) and 

while descending (climb down). Failure to maintain three points of contact puts the user at serious 

risk of bodily injury. Failure to follow these instructions will result in serious injury or death! 
WARNING! As you approach the top of the ladder, attach your full-body fall arrest harness tether to 

the tree trunk as soon as possible. After your tether has been attached to the tree, attach the 

ratchet straps to secure the top of the stand to the tree. DO NOT sit or stand on the standing 

platform until the ratchet straps have been securely fastened. Failure to follow these instructions 

may result in serious injury or death!

STEP 8:

 Wrap yellow tension strap (#26) around both stabilizer straps and pull tight drawing 

stabilizer straps together.  Wrap tension strap around drawn stabilizer straps 3 to 4 times 

and tie off tension strap so it will not loosen (refer to Figure 21).

2

3

1

4

                Figure 21

Connect Yelllow Tension Strap

       Figure 22

     Two Adults 

   Steady Ladder

Содержание 163790




































Отзывы: