Game ready ATX TRAUMATIC AMPUTEE, Руководство пользователя

Страница: 1 / 76

TRAUMATIC
AMPUTEE
USE GUIDE
ENGLISH
ASSEMBLY
The Heat Exchanger
(PN 520912-03, 520915-03, 520918-03)
fits inside the
Sleeve
(PN 510912, 510915, 510916, 510918)
and comes as part of a pre-as-
sembled Wrap
(PN 590912-03, 590915-03, 590916-03, 590918-03)
. If the Heat
Exchanger is removed to launder the Sleeve, or for any other reason,
please use the following instructions to re-insert the Heat Exchanger
into the Sleeve.
SIZING SPECIFICATIONS
• Size: Below Knee, Large / All others One Size
• Anatomical Orientation: Above Knee, Left or Right
WARNING
It is mandatory to fully read and understand your
System’s User Manual before using the device.
Failure to follow operating instructions could result in
serious injury.
IMPORTANT
Read complete indications, contraindications,
cautions, and warning before using this product.
Keep this document for future reference.
REMOVAL OF HEAT EXCHANGER
1. Disconnect the Connector Hose from the Wrap
2. Unzip the zipper
3. Gently pull out the Heat Exchanger
STORAGE OF YOUR WRAP
Hang your Wrap on a wide hanger or lay flat. Do not fold or stack it, as
this could kink the fluid chamber and the Wrap will not work properly.
1
Place the Sleeve on a flat surface
with logo side up, and determine the
opening location.
2
Insert the Heat Exchanger into the
Sleeve with the blue side down (The
blue side of the Heat Exchanger should
touch the blue side of the Sleeve).
3
Be sure the Heat Exchanger is flat
inside the Sleeve with no folds or
creases. Zip up the Sleeve, if applicable.
After assembly, lay the blue side up and
ensure the Heat Exchanger is uniformly
laid out and smooth inside the Sleeve.
FOR USE WITH
GAME READY
GRPRO
®
2.1 SYSTEM
*Wraps are not shown to scale