G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
6
P+ PREMIUM 60, Installation Guide,
rel.
1.4
2.2
For installation in an 19” cabinet
2.2.1
Removing the side panels
In order for the Premium 60 UPS to fit in a 19” cabinet, the side panels of the UPS must be removed.
1.
At the rear of the UPS there are four catches holding the side panels of the UPS in place.
Move the catches to a vertical position.
Figure 4: Removing the side panels (part 1)
2.
Remove the side panels one at a time. To remove the side panel, push the panel forward about 3 cm,
then lift it up and away from the UPS. You may have to jiggle it slightly to free it from the UPS.
Figure 5: Removing the side panels (part 2)
