8
HOW TO USE
3.1 - Power on/off
To switch Rediair on/off, press the power
button. Rediair will start in automatic mode.
In automatic mode, the motor speed will be
controlled by a sensor, which is automatically
regulated in 3 stages, depending on the air
quality. Pressing the power button again will
put the Rediair unit back into standby mode.
3.2 - Speed setting (manual mode)
Press to enter ‘manual mode’ and cycle
through fan speed settings. Speed selection
is only available in manual mode.
3.3 - Mode selection
The mode button allows you to cycle through
the 3 additional modes of operation:
• 3.3.1 - Automatic mode
: Rediair
will select the appropriate speed,
depending on the current air quality.
In low light conditions (e.g. at night),
Rediair automatically reduces the
fan speed (see ‘3.8 Light Sensor’).
• 3.3.2 - Turbo mode
: Made to provide
maximum decontamination, turbo
mode allows the Rediair fan to
operate at its highest speeds.
• 3.3.3 - Night mode
: Rediair will operate
at its quietest level. All lights and displays
are turned off and the fan runs at its
slowest speed. In sleep mode, Rediair will
not respond to the air quality sensor.
3.4 - Timer setting
The ‘Timer’ setting lets Rediair operate
automatically for a select period, ranging
from 1 hour to 12 hours. Press the button
until your desired time appears on the
display. 10 seconds after the last press,
the display switches back to the air
quality display. To switch off the timer
setting, press the ‘Timer’ button until no
hour signals are lit up on the display.
3.5 - Child lock
To activate the child lock safety
feature, press the ‘Child Lock’ button
on the display. To unlock, press and
hold the button for 10 seconds.
µg/m
3
PM2.5
1h 2h 4h 8h 12h
AUTO
FILTER
TIMER
LOCK
POWER
MODE
SPEED
REDIAIR LCD TOUCH CONTROL PANEL
LCD TOUCH CONTROL PANEL
3.6
3.1
3.5
3.2
3.3.3
3.8
3.3.1
3.4
3.3
3.3.2
3.7
