13
On the back of Rediair is a small flap
which houses the particle sensor.
To clean the sensor, lift the flap
and carefully clean it with a cotton
swab. This should be done every
2 months or if the LED air indicator
consistently shows poor air quality.
Re-install the external covers and the
pre-filters (both sides).
Note:
Ensure
external covers are fitted correctly
or the Rediair will not power on.
µg/m
3
PM2.5
1h 2h 4h 8h 12h
AUTO
FILTER
TIMER
LOCK
POWER
MODE
SPEED
To clean
Rediair’s air
outlet, lift the
grill from the
side with the
arrow symbol
and clean the
area with a
dust cloth.
The pre-filters can
be rinsed with
clean water.
The pre-filters must be completely
dry before being used again as any
remaining moisture could potentially
cause damage to the HEPA 14 filter.
4.8
4.6
4.4
4.9
4.7
4.5