page 3
Place Lamp Part
(A) on top of your existing
3” round post and tighten the 3 screws
provided to secure the lamp.
1. First remove screws from center
support
(C) and the screw from the
back of the arm
(B).
2. Attach arm(s) using these screws; the
silver screw will need to be attached
from the inside of the center support
(C).
3. Place center support
(C) on top of your
existing pole and tighten screws
(H).
4. Place lamps
(A) onto the arms and
secure with screws
(F).
NOTE: locate your solar lamp facing the south
for best results.
1. Use electric drill to make two holes in the
wall
2. Place provided screw anchors into the holes
3. Place the wall bracket
(N) in line with the
holes and screw on with the provided
screws.
4. Place Lamp
(A) onto bracket and secure
with the 3 screws provided.
GS-97K-F
GS-97K-F2/GS-97K-F3
GS-97K-W
Assembly Instructions
A
