Installation Instructions for models GS-98L\S\D\T
1.
Mark and drill three holes, using the triangle marker (included), into a
solid surface no smaller than the fastening screws. The holes shall be
lined up with the holes of the lamp base (D).
2.
Put the fastening screws (included) into the drilled holes with their
threaded ends facing up (Fig. 3).
3.
Place lamp base onto fastening screws and secure base with the nuts
using a wrench (Fig 4).
4.
Make sure the lamp base (D) is stable before installing Part (E).
5.
Place part (E) on top of part (D) and tighten with the provided screws
using a wrench.
6.
GS-98L:
6.1
Screw part (F) onto part (E).
6.2
Place Part (A) on top of Part (F) and tighten the 3 screws.
7
GS-98S:
7.1
Screw part (G) onto part (E) and part (F) onto part (G).
7.2
Place Part (A) on top of Part (F) and tighten the 3 screws.
8. GS-98D\GS-98T:
8.1
Screw part (G) onto part (E).
8.2
Screw Part (H) onto Part (G).
8.3
Place bracket (I) into part (H) and tighten the knob from within
Part (H), then screw the second screw from outside Part (I) to
secure the bracket to part (H).
8.4
Repeat steps (8.3) two times in model GS-98D and three times
in model GS-98T.
8.5
Install part (J) on top of Part (H) by screwing the two screws.
GS-98S/D/T
GS-98L
Fig. 4
Fig. 3
