Assembly Instructions
NOTE
: The solar light must be charged for two sunny days for best results.
GS-97FN
Place Lamp Part (A) on top of your existing 3” post and tighten the 3
screws provided to secure the lamp.
GS-97NF2\GS-9NF3:
1.
Screw Arm part (B) onto part (C). There are 2 screw holes per
arm; one is on the inside bottom and one is on the outside top.
2.
Repeat step 1 twice for the GS-97NF2 and 3 times for GS-
97NF3.
3.
Once step 2 is complete insert Part (D) into Part (C) and secure
with provided screws Part (H).
4.
Place Part (C) on top of Pole and tighten the screws Part (H).
5.
Place lamp Part (A) onto the arm and secure with the screws
Part (F). Repeat twice in model GS-97NF2 and 3 times in
model GS-97NF3.
6.
Place the lights on top of existing 3” post and secure the Part
(C) with screws provided.
