4
Assembly Instructions
Ground Mounting
1. Assemble the mounting poles (B1, B2) and Stake (C);
(as shown in fig.5).
Note:
There are 2 optional heights to use for your
convenience.
2. Slide the body unit (A) into the upper part (B1) using
the 2 joints (J) provided.
3. Carefully insert the stakes into the ground where
desired.
NOTE: If the ground is hard and packed, moisten the
ground with water before inserting the stake (to avoid
breakage). Use a rubber mallet (not included), if
necessary, to gently tap stake into ground.
Figure 5
Wall mounting
1. Take out the 2 round parts (R) located
on the sides of the body unit.
2. Fix the unit to the wall using the screws
and anchors provided
(as shown in fig.6).
Figure 6
Operation
Adjust the switch located on the backside of the
unit to “AUTO” position (as shown in fig. 7)
NOTE:
The solar address light must be charged
for two sunny days for best results.
Figure 7
