4
Replacing the Batteries
(After several years of use, the battery may need replacing).
1. Unscrew the two screws and detach part (A) from part (B).
Make sure the ON/OFF switch (Fig. 2) is in the OFF position.
2. Unscrew the battery compartment screw located on the silver
reflector and remove the battery compartment door.
3. Unclip the connector and remove the old battery. Make sure the
new battery is high quality 3.2V/1,500mAh Li
-ion
Rechargeable
battery with connector.
4. Clip on new battery and install into the battery compartment.
5. Screw back battery compartment door.
6. Reattach part (A) to part (B) and secure with the 2 screws.
Maintenance
Clean the solar module regularly with a damp towel to guarantee optimum
performance of the solar panel. Do not use any type of solvent for cleaning
and be careful not to put too much pressure on the module while cleaning.
Troubleshooting
If your solar charged light does not come on at dusk despite observance of all
the instructions, please try the following steps:
1. Make sure that the solar light is not being affected by any other
light source.
2. Ensure the solar light is not positioned in the shade during the
day.
3.
Make sure the switch in the lamp head is in NOT on the” OFF”
position.
4. Check that the batteries are installed correctly.
5. Check that the GS Solar LED Light Bulb is installed correctly.
WINTERTIME TIPS:
Keep snow and debris cleaned off the solar panels so
the batteries can recharge. If the lights are covered with snow for an extended
period of time, after the snow melts, allow all the batteries to charge in full,
direct sunlight for at least 6 hours to their maximum capacity.
NOTE
: The performance of the solar lamp will vary with the time of year. It will
deliver more light when it has had a full day in the sun rather than a day in
overcast weather.
** Gama Sonic batteries are available at
You can purchase it directly at:
https://gamasonic.com/product-category/parts-and-accessories/
