3
Installation Instructions
Advice
: Ideal Pole Height: 6.5
–
13 feet; Ideal Pole Diameter: 1.5
–
2 inches.
If multiple lights are purchased install between 25-40 feet apart for optimal
light spread.
Surface Mount
: Make sure the alignment of your mounting location is level and even
for your solar light installation. Drill two holes into your desired installation surface
and place anchors in to the holes. Position the two provided screws through the
holes of the lamp and into the anchors. Tighten the screws to secure the lamp to the
surface.
Note
: There are specific types of screws for different surfaces. If
you’re unsure of the
appropriate type of screw to use on your desired surface, please consult a professional.
Post Mount
: Assemble hardware to fixture housing; slide fixture over light post and
make sure the curved side of the mount hugs the light pole; tighten to desired height
and position
(CAUTION: DO NOT OVERTIGHTEN SCREWS)
.
Replacing the Battery
(After several years of use, the battery may need replacing)
1.
Remove all 10 screws from the underside of the security light.
2.
Unclip the battery connector and remove the old battery. Make sure the
new battery is a high quality
–
1x Li-Ion Battery pack (3.7 Volt / 4000
mAh) with matching connector.
3.
Install the new battery into the battery compartment.
4.
Re-assemble by reversing Step 1.
