Fig. 7
Screw locations
Replacing the Batteries
8.
After several years of use, the batteries may need replacing.
a.
Unscrew the 2 screws on the bottom of the light (fig. 7).
b.
Remove the battery by unclipping the connector.
Make sure the new battery pack is a high quality
Li-ion 3.2V rechargeable battery
.
c.
Connect the new battery pack and place into the battery
compartment.
d.
Reassemble the unit by reversing the above procedure.
WARNING
: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by fire as
batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur.
Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance with local,
State and federal regulations. Do not mix old and new batteries.
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any
type of solvent for cleaning and be careful not to put too much pressure on the solar panels while
cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite observance of all the instructions, please try
the following steps:
1.
Make sure that the solar panel is not being affected by any other light source.
2.
Ensure the solar panel is not positioned in the shade during the day.
3.
Make sure the switch is on the On position.
4.
Check that the batteries are installed correctly.
NOTE
: The performance of the solar lamp will vary with the time of year. It will deliver more light when
it has had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS:
For optimal performance, be sure to remove any snow or debris accumulation from
solar panel. A solar panel free of debris will charge the batteries much more efficiently.
WARNING
: Please keep out of reach of children.
