page 3
Assembly Instructions
NOTE: The following steps are for reference only. Consult your local
hardware store for the best installation method for your surface.
1
. Using a screwdriver remove
the four screws attaching
the top and remove the top
(Fig. 1).
2
. Screw in provided A-60
Gama Sonic bulb while
gripping the base only
(Fig. 2).
3
. Reverse Step 1 and re-attach
top and screws accordingly.
NOTE: When installing the GS
Solar LED Bulb, hold it from its
silver base not by the glass .
Fig. 1
Fig. 2
1
. Place the assembled light fixture
on top of your existing 3” post and
hand tighten the 3 provided screws
to secure the lamp (Fig. 3).
Note: Installing the light on or near a
wall may limit the functionality of the
solar panel for sun exposure. Make
sure the lamp is mounted so direct sun
exposure is available.
Installation Instructions
Fig. 3
Operation Instructions
1
. Turn the external operation
switch to the Low or High
position (Fig. 4).
2
. according to your preferences:
Low
: For softer light and
longer duration.
High
: For brighter light
output.
3
. The solar lamp will
automatically operate at dusk.
NOTE:
The solar light must be
charged for two sunny days in the
“ON” position for best results.
Fig. 4
