Assembly Instructions
Operation Instructions
page 3
•
Using the wall bracket (C) as a template,
mark where the two holes will need to be.
•
Using an electric drill, make two holes
no larger than the size of the included
anchors.
•
Place the anchors in the holes.
•
Align the wall bracket (C) with the holes
and secure it using the provided screws.
•
Attach the top (A) to the wall bracket (C)
and secure by tightening the two set
screws with the provided hex wrench.
NOTE: The lamp will only attach to the
bracket in one direction. Make sure the slot
for the notch is facing forward so the lamp
will attach to the bracket.
•
Insert the GS Solar LED Bulb by twisting
clockwise.
•
Move the operation switch on the back
of the lamp to the Low or High position
according to your preferences:
-
Low: softer light and longer duration
-
High: brighter light output
•
The solar lamp will automatically operate
at dusk.
Replacement Parts
Replacement Batteries and Bulbs are
available at www.gamasonic.com or via our
Toll Free number: +1-800-835-4113.
Your Lamp can use the following bulbs:
A60WW20W – included bulb with Warm
White LEDs (2700K)
A60BW20W – bulb with Bright White LEDs
(6000K)
F30WW05W –Flame bulb with simulated
flame LEDs
T45WW10W – Edison LED Bulb with Warm
White LEDs (2700k)
Your lamp uses the following battery:
GS32V30
A
C
