background image

Surface Mount: 

Note: There are specific types of screws 

for different surfaces. If you’re unsure of 

the appropriate type of screw to use on 

your desired surface, please consult a 

professional.

page 3

Advice: Ideal pole height: 8 – 15 feet; ideal pole diameter: 3 inches. 
If multiple lights are purchased, install between 50-70 feet apart for optimal light spread. 

 8 – 15 f

eet

50 – 70 feet

50 – 70 feet

50 – 70 feet

Assemble hardware to fixture housing as shown 

in the image (make sure the curved side of the 

mount faces in). Slide fixture over light post 

so the curved side of the mount hugs the light 

pole. Adjust the light to the desired height and 

position. Then tighten the four bolts. 

CAUTION: DO NOT OVERTIGHTEN SCREWS

Post Mount: 

Possible places to install the 301iST60822:

• Outside Garage • House Entryway • Patios • Garden • Driveway  

• Camping Site • Rural Street • Farm • Green Belts • Square

Fig. 1

Fig. 2

Diameter

2-3 inches

Post

Make sure the alignment of your mounting 

location is level and even for your solar light 

installation. Drill four holes into your desired 

installation surface using the lamp as a 

template and place anchors in to the holes. 

Position the four provided screws through the 

holes of the lamp and into the anchors. Tighten 

the screws to secure the lamp to the surface. 

*P

ole 

n

ot 

in

cluded

Solar Lamp Location

For optimum light duration throughout the night, it is very important to mount your solar lamp 

in a spot where it will receive the maximum amount of direct sunlight throughout the day. 

Отзывы: