Surface Mount:
Note: There are specific types of screws
for different surfaces. If you’re unsure of
the appropriate type of screw to use on
your desired surface, please consult a
professional.
page 3
Advice: Ideal Pole Height: 8 – 15 feet; Ideal Pole Diameter: 3 inches.
If multiple lights are purchased install between 30-50 feet apart for optimal light spread.
8 – 15 f
eet
30 – 50 feet
30 – 50 feet
30 – 50 feet
Assemble hardware to fixture housing as shown
in the image (make sure the curved side of the
mount faces in). Slide fixture over light post
so the curved side of the mount hugs the light
pole. Adjust the light to the desired height and
position. Then tighten the four bolts.
CAUTION: DO NOT OVERTIGHTEN SCREWS
Post Mount:
Possible places to install the 201iS60822:
• Outside Garage • House Entryway • Patios • Garden • Driveway
• Camping Site • Rural Street • Farm • Green Belts • Square
Fig. 1
Fig. 2
Diameter
2-3 inc
Post
Make sure the alignment of your mounting
location is level and even for your solar light
installation. Drill four holes into your desired
installation surface using the lamp as a
template and place anchors in to the holes.
Position the four provided screws through the
holes of the lamp and into the anchors. Tighten
the screws to secure the lamp to the surface.
*Pole not included
Solar Lamp Location
For optimum light duration throughout the night, it is very important to mount your solar lamp
in a spot where it will receive the maximum amount of direct sunlight throughout the day.
