Assembly Instructions
Operation Instructions
page 3
Solar Panel Installation
•
Using the solar panel (A) as a template,
mark the location of the three mounting
holes and a hole for the cord.
•
If using the anchors, drill three holes no
larger than the anchors. If not using
anchors, drill a hole of appropriate size for
the screws being used.
•
Drill out the hole for the cord.
•
Slide the cord through the cord hole and
secure the panel using the three screws.
•
Adjust the solar panel (A) so the panel is
facing south and angled at 45 degrees for
maximum sun exposure. You can turn the
panel by loosening the adjustment knob
at the base of the solar panel (A).
Light Installation (repeat for second lamp if
installing the double light version)
•
Make sure the light is within reach of the
cord from the solar panel (A).
NOTE: If using the double light version,
make sure the second light is close
enough to the first light to use the
connecting cord (D).
•
Using the mounting bracket (C) as a
template, mark and drill two holes.
NOTE: Make sure the open part of the
channel is facing up if mounting on a wall.
•
Slide the fixture (B) on the bracket.
•
Plug the cord from the solar panel (A) into
the fixture (B) where it says “SP”
•
If using the double light version, plug the
connecting cord (D) into the fist fixture
(B) where it says “EXT” and then into the
second fixture (B).
•
Install the GS Solar LED Bulb per the
Operation Instructions.
•
The lamp is ready to be used.
•
Remove the clear dome from the fixture
(B) by twisting counter clockwise.
•
Insert the GS Solar LED Bulb into the
fixture by twisting clockwise.
•
Replace the clear dome on the fixture (B)
by twisting clockwise.
•
Turn the lamp on by pulling the cord.
•
Turn the lamp off
by pulling the cord
again.
•
The red indicator
light will be lit when
the battery is being
charged by the sun.
Replacement Parts
Replacement Batteries and Bulbs are
available at www.gamasonic.com or via
our Toll Free number: +1-800-835-4113.
Your Lamp can use the following bulbs:
A60BW20W – included bulb with Bright
White LEDs (6000K)
A60WW20W – bulb with Warm White
LEDs (2700K)
Your lamp uses the following battery:
GS48V20
