Acquaer Ltd.
www.gamagarden.eu
H-
4900, Fehérgyarmat, Szatmári út 11.
8
Fit the right-hand guard extension in the same way.
WARNING:
Never use the machine without the guards fitted.
Assembly of the rotating blades
Fit the rotating blades with screws M8 x 25, lock washers Ø 8 and nuts M8 (fig. 7). The rotating blades in fig. 7 must be pla
ced on the right-
hand side of the machine, as seen from the direction of travel. Always fit the rotating blades with the edges in the direction of travel. If the
rotating blade has been fitted correctly, the blade closest to the gearbox will curve outwards from the gearbox. The rotating blades on the
left-hand side are fitted in the same way.
NOTE: The right and left sides of the machine are specified as viewed from the driving position behind the
handle. NOTE: The letters L (left) and R (right) on the rotating blades specify the assembly position.
Assembly of the rotating blades and side discs on the gearbox
1.
Place the inner rotating blade mounts with the rotating blades on the gearbox output shaft (pos. 4, fig. 7a). Align the holes in the
rotating blade mounts with the holes in the shaft and lock in place with the clamps and split pins (pos. 3 and 2).
2.
Remove the split pins and clamps from outer rotating blade mounts, fit the side discs, align the holes in the rotating blade mounts
and the discs and lock in place with the split pins and clamps.
3.
Position the outer rotating blade mounts and side discs (pos. 1, fig. 7a) on the inner rotating blade mounts from both sides, align
the holes with each other and lock in position with pins and clips.
