background image

RF340-400APR

Instruction Manual

WWW.GAMAINC.COM

Included in this Kit:
(1) RF340-400APR Receiver
(1) 2-Button Transmitter

- 2-Button Rechargeable Transmitter GKF-WPTX-2

Available accessories:
- Package of A23 12V Alkaline Batteries A23-6
- 2-Button Waterproof Transmitter KF340-2WP

The RF340-400APR is a Heavy Duty, Long Range Polarity Reversing R.F. Remote Control is designed for bi-
directional control of DC motors. This control is intended for high current applications. The output is rated for a 100A 
continuous load and up to a 400A intermittent load (10% duty cycle).

This system is ideal for controlling lifts, jacks, winches, and agricultural applications where large capacity 12VDC 
polarity reversing DC motors are used. The keyfob transmitter has two buttons. The left button runs the motor in one 
direction and right button runs the motor in the opposite direction. There are also auxiliary waterproof pushbutton 
switches mounted on the receiver. This permits operation of the control without using a transmitter.

The control can be configured for either momentary or latching operation. In the momentary mode, the motor will 
operate as long as the buttons are held down. In the latching mode, pressing either button will start the motor and 
pressing the button a second time will stop the motor. The auxiliary switches on the receiver only provide momentary 
operation.

The control is housed in a IP-68 waterproof enclosure and is suitable for use in harsh environments. The enclosure 
dimensions are approximately 9″ L x 6″ W x 4″ H. The long range antenna is housed in a separate housing and 
connects to the receiver with a 5 foot cable.

There are four screw terminals for the connections. Two connect 12 volts and Ground and the other two connect to 
the DC motor. Transmit range is greater than 500 feet under normal operating conditions and can go as far as 900 
feet under ideal conditions. FCC Approved. Proudly made in the U.S.A.

Page 1 REV B 03/09/20

- 340MHz Long Range Antenna LRA-340

- 2-Button Keyfob Transmitter KF340-2

Содержание RF340-400APR-WPTX

Страница 1: ...on switches mounted on the receiver This permits operation of the control without using a transmitter The control can be configured for either momentary or latching operation In the momentary mode the motor will operate as long as the buttons are held down In the latching mode pressing either button will start the motor and pressing the button a second time will stop the motor The auxiliary switch...

Страница 2: ...n the transmitter and verify that the red program LED extinguishes and then illuminates blinks once Proceed to Step 5 4 To configure the receiver for latching output press and release the DOWN button on the transmitter and verify that the red program LED extinguishes and illuminates blinks once 5 Repeat previous step for additional transmitters that will operate with this particular receiver The r...

Страница 3: ...WWW GAMAINC COM Page 3 REV B 03 09 20 RF340 400APR Instruction Manual Wiring Diagram RF12V1PR ASL GAMA Electronics Inc www gamainc com M1 M2 12V 12V PROGRAM M1 M2 12V 12V Programming Switch ...

Страница 4: ...ery with the system if this occurs 2 Check the voltage supply at the receiver The receiver is designed to function at 10 15VDC Voltage on the and terminals on the control should be within this range 3 Reprogram the remote control If the system is non functional try to reprogram the remote control The program may not have taken during the programming process or the program button may have been pres...

Отзывы: