Version 2, 13 June 2017, Page
1
of
4
Safe-Cell
®
Manual Prison Tapware
PRODUCT CODES:
-
50101C - 50104C
-
50107C - 50112C
SPECIFICATIONS
Designed for maximum protection against vandalism, Safe-Cell
®
basin/sink assemblies are made
from heavy duty components and can be installed from the rear.
The basin/sink assembly is made of chrome plated brass.
Quarter turn ceramic disc.
Machined cold or hot identification button.
Anti-ligature design.
Available with either Ezy-Grip or Multi-Grip handle (as shown above).
IMPORTANT
: All Safe-Cell
®
wall top assemblies are tested in accordance with AS/NZS 3718 and leave our
premises in good working order.
TECHNICAL DATA
Inlet
½” CU/BSP
Outlet
½” CU/BSP
Headwork
Ceramic
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
75
Nominal Flow Rate (LPM)
N/A
Finish
Chrome
NOTE:
Galvin Specialised continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
Power drill
Spanner and hex key
Thread tape
