Version 2, 23
rd
March 2021, Page
5
of
5
TROUBLESHOOTING
PROBLEM
CAUSE
RECTIFICATION
Water is not flowing from
tap
Water is turned off
Turn on water
Blocked flow regulating screw
Remove regulating screw and clean
Rate of flow inadequate
The flow regulating screw may
not be adjusted correctly
Remove blanking screw and adjust flow
regulating screw as described above
WARRANTY
The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty
Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.
Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties, express or implied, including but
not limited to the implied warranties of merchantability and fitness for a particular purpose.
alvin ngineering Pty td produ ts are overed under our anufa turer’s warranty available for download
from www.galvinengineering.com.au Galvin Engineering Pty Ltd expressly warrants that the product is free
from operational defects in workmanship and materials for the warranty period as shown on the schedule in the
anufa turer’s warranty. During the warranty period, Galvin Engineering will replace or repair any defective
produ ts anufa tured by alvin ngineering without harge so long as the ter s of the anufa turer’s
warranty are complied with.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for
breach of warranty, and Galvin Engineering Pty Ltd shall not be responsible for any incidental, special or
consequential damages, including without limitation, lost profits or the cost of repairing or replacing other
property which is damaged if this product does not work properly, other costs resulting from labour charges,
delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions,
chemical, electrical or any other circumstances over which Galvin Engineering has no control. This warranty
shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or
alteration of the product.
