Product Installation Guideline
Within Australia:
1300 514 074
Outside Australia: P: +61 (0)8 9338 2344
F: +61 (0)8 9338 2340
www.galvinengineering.com.au
ABN: 78 008 719 382
PERTH I SYDNEY I MELBOURNE I BRISBANE I ADELAIDE
Quality
ISO 9001
Environment
ISO 14001
Product Installation Guideline
WARRANTY
The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect
to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty. Ltd.
hereby specifically disclaims all other warranties, express or implied, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose.
Galvin Engineering Pty Ltd products are covered under our manufacturer’s warranty available for download from www.
galvinengineering.com.au Galvin Engineering Pty Ltd expressly warrants that the product is free from operational defects
in workmanship and materials for the warranty period as shown on the schedule in the manufacturer’s warranty. During the
warranty period, Galvin Engineering will replace or repair any defective products manufactured by Galvin Engineering without
charge, so long as the terms of the Manufacturer’s warranty are complied with.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of
warranty, and Galvin Engineering Pty Ltd shall not be responsible for any incidental, special or consequential damages,
including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product
does not work properly, other costs resulting from labour charges, delays, vandalism, negligence, fouling caused by
foreign material, damage from adverse water conditions, chemical, electrical or any other circumstances over which Galvin
Engineering has no control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or
improper maintenance or alteration of the product.
