33
Figure 21: AccuLase-GPA™ Web GUI Home Screen
The AccuLase-GPA™ web GUI is divided into three sections – the Toolbars on the top of the panel, the
Navigation pane on the left of the screen, and the information panel on the right of the screen.
4.3.1 Status Indicators and Toolbar
The two rows at the top of the screen include a toolbar with a series of buttons used to operate
and configure the AccuLase-GPA™, as well as some status indicators. The status indicators, shown
in Figure 30, give information about the alarm status of the analyzer as well as the access level
the user has in the AccuLase-GPA™ web GUI.
Figure 22: Toolbar Status Indicators
The purpose of these three indicators is described in Table 7.
Table 7: AccuLase-GPA™ Web GUI Toolbar Status Indicators
Indicator
Explanation
System Alarm
Indicates the overall alarm status of the system. If the bell icon to the right of the
text is green, this indicates there are no active alarms and the system status is
normal. If it is red, there is at least one system alarm active. Clicking on this
indicator will bring the user directly to the Alarms page.
Mode
Indicates the current user access level for the AccuLase-GPA™ web GUI. In READ
ONLY mode, the user is only able to observe the analysis results and analyzer
configuration. In UPDATE MODE, the user is able to observe the analyzer results
and configuration, and also is able to make changes to the analyzer
configuration.
Mode Select Menu
To the right of the Mode field is a drop-down menu that allows the user to
choose the current access level for the AccuLase-GPA™ web GUI. Selecting
Update Mode will require the user to enter the Update mode password; the
default password for this mode is ‘fact’.
