Copyright © 2017 – Galtronics Corporation Ltd.
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
Model No:
MK-06679
| Mounting Instructions outdoor DAS antennas
page 2 of 3
WWW.GALTRONICS.COM
A
90
-0
00
01
R
e
le
a
se
D
a
te
: 2
1-
A
u
g
-2
017
;
Re
vi
sio
n:
02
Mounting Hardare to Antenna
(included with bracket)
ITEM
QTY
DESCRIPTION
1
1
Bracket
2
2
3/8”x2.5 Hex Bolt
3
4
3/8” Plain Washer
4
2
3/8” Nut
5
2
3/8” Spring Lock Washer
Mounting Hardware to Pole
(to be supplied by customer)
Config. 1 – Metal Strapping
ITEM
QTY
DESCRIPTION
1
3
Metal Strapping Kit
Config. 2 – Through Bolting
ITEM
QTY
DESCRIPTION
1
6
3/8” Large Diameter Flat Washer
2
3
3/8” Hex Bolt
1
3
6
3/8” Spring Lock Washer
Notes:
1. Required bolt length varies with pole diameter.
Config. 1 – Metal Strapping
Recommended for metal
or composite poles
Config. 2 – Through Bolting
Recommended for wooden poles
Assembly instructions
Stage 1 – Preparing Pole
The bracket can be attached to the pole with either:
Metal Strapping (Config. 1) which is recommended for
metal or composite poles, or
Through-Bolting (Config. 2) which is recommended for
wooden poles.
For Through Bolting (config. 2):
Select the best side of the woodend pole for mounting the
bracket (most level/plumb, most flat)
Using the bracket as a guide, mark the hole locations.
Drill 3x mounting holes through the center of the pole as
shown.
Config. 2
