ASSEMBLY INSTRUCTIONS
C.
Antenna Mounting
D
.
Cup Head Screw Installation
Place the antenna rod on top of the pole and adjust the position
of the right bracket to the center of the pole. Tighten all bolts.
Install 5/16” cup head set screw and
tighten to the appropriate torque. Lock
the antenna rod using the nylon flange
locking hex nut. Tighten hex nut to 15Nm
(132In*Lbs).
E
.
Check Torque
After adjustment all loosened bolts
must be tightened with a torque of:
5/16
˝
- 15Nm (132In*Lbs)
7/16
˝
- 40Nm (354In*Lbs)
1
˝
- 150Nm (1328In*Lbs)
DO NOT REUSE LOCKING HEX NUT.
ONLY USE NEW LOCKING HEX NUTS
FOR ANTENNA MOUNTING ADJUSTMENTS.
5/16“ - Nylon Flange
Lock Nut (2x)
Antenna Rod / 1“ Mount Adapter Rod
5/16“ - Cup Head
Set Screw (2x)
w w w . g a l t r o n i c s . c o m
Copyright © 2016 – Galtronics Corporation Ltd.
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specifi
cation without prior notice.
Ultra Flat In-Building SISO Antenna [698-960MHz, 1695-2700 MHz]
Electrical Speci
fi
cations
21-234-03 R
elease Date: 1
6
th
September, 2016; Revision: S-
4; Patent Pending
Baylin TechnOlogies Company
Model No:
62-20-09 |
Mounting instructions outdoor DAS antennas
page 4 of 4
