-9-
Mounting
WARNING
DO NOT mount in air bag deployment area.
Devices should be mounted only in locations listed in SAE standard J1849.
Controls should be placed within convenient reach of the driver.
Assure clearances before drilling in vehicle.
Sound levels produced by attached speakers can cause permanent hearing loss.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community
please observe the following safety precautions.
Failure to follow all safety
precautions and instructions may result in property damage, injury or death.
SIREN AMPLIFIER & RELAY CONTROL BOX
•
The LCS800 amplifier should be
mounted in a location such as the
driver compartment firewall,
under the seat, or in the trunk.
•
Do not mount the amplifier in the
engine compartment or in an area
that would be allowed direct
exposure to weather elements.
•
Choose a mounting location away
from any air bag deployment
areas.
•
Assure adequate ventilation to prevent overheating.
1
. The amplifier unit is provided with a mounting flange that contains four 1/4"
holes.
2. Using the amplifier unit itself as a template, mark the location of the four
mounting holes to be drilled.
3. Check for obstructions behind the mounting hole locations and drill the four
mounting holes and secure the amplifier using appropriate hardware (not
supplied).
4. Be sure that all wiring harness connections are made prior to connecting the
harness to the amplifier unit.
