background image

2.1 SET UP

There are two options for connecting the subwoofer in a 

2.1 system - either using the HIGH LEVEL IN or the LINE IN. 

The style of speakers and amplifier you are using will dictate 

which method of connection you will use.

When using Gallo Acoustics Micro or A’Diva speakers, or similar 

compact loudspeakers, use the following method. This will run 

the subwoofer and protect your speakers from the lowest 

frequencies - ensure your subwoofer is set to CROSSOVER mode.

•   

Using speaker cables, connect the speaker outputs on your

     stereo amplifier to the HIGH LEVEL IN on the subwoofer.

•   

Run a second set of speaker cables from the HIGH LEVEL OUT

     on the subwoofer to your loudspeakers.

•   

Adjust the subwoofer’s CROSSOVER to around 100Hz.

•    

When music is playing, you can adjust the LEVEL control 

     to match the subwoofer and loudspeaker volume.

If your speakers can handle a full range signal, like our Strada 2 

speakers, then you may wish to connect the subwoofer as 

follows. Ensure the subwoofer is set to CROSSOVER mode.

•   

Run speaker cables from your amplifier to your loudspeakers.

•   

If your amplifier has a pre-out, then this can be used to 

     connect your amplifier to the subwoofer using a coaxial 

     (RCA) cable. 

•   

If there is no pre-out, then you can run a second set of speaker

     cables from your amplifier to the HIGH LEVEL IN of your 

     subwoofer.

•   

On the subwoofer adjust the CROSSOVER to around 100Hz,

     once the system is playing music, you can adjust this to suit

     your loudspeakers performance capabilities.

•    

When music is playing, you can adjust the LEVEL control to

     match the subwoofer and loudspeaker volume.

AMPLIFIER

TR-3D SUBWOOFER

SPEAKER

SPEAKER

AMPLIFIER

SPEAKER

TR-3D SUBWOOFER

SPEAKER

10

2.1 PRE-OUT

2.1

Содержание TR-3D

















Отзывы: