Gallien-Krueger MB110, Руководство пользователя

Страница: 9 / 10

MB SERIES COMBOS
BOOST
HEAD
PHONES
+V
INPUT
DIRECT
OUT
GAIN
-10dB
ON
ON
OFF
CONTOUR
OFF
HORN SW
S P KR
E XT
+1 +1
-1 -1
ON
OFF
MASTER
AUX IN
PRE
POST
ON OFF
CLIP
DETECTOR
LIMITER
DIRECT
OUT
AMP
MB210-II
HORN SW
ON
OFF
MB212-II
HORN SW
PIEZO
HORN
PIEZO
HORN
PIEZO
HORN
PIEZO
HORN
ON
OFF
MB115-II
HORN SW
ON
OFF
MB410
AUX IN
GAIN
OFF
CONTOUR
ON
CLIP
DETECTOR
LIMITER
HEAD
PHONES
+V
Dimensions (HxWxD): Weight:
MB210-II 23”x19”x14.5” 35 lbs.
MB212-II 26”x19”x14.5” 41 lbs.
MB410 23“x23”x16” 51 lbs.
MB115-II 23”x19”x14.5” 38 lbs.
MB112-II 17”x15”x14.5” 30 lbs.
MB110 16”x13”x11.5” 20 lbs.
Power requirements:
MB210-II, MB212-II
U.S.A./Canada 120V/60Hz.
& MB410 580W(full power), 128W(average power)
Europe 230V/50Hz/60Hz
580W(full power), 128W(average power)
Japan 100V/50Hz
580W(full power), 128W(average power)
MB115-II & MB112-II
U.S.A/Canada 120V/60Hz.
240W(full power), 48.6 W (average power)
Europe 230V/50Hz/60Hz
240W(full power), 48.6W(average power)
Japan 100V/50Hz
240W(full power), 48.6W(average power)
MB110
U.S.A/Canada 120V/60Hz.
140W (full power), 28.6 W (average power)
Europe 230V/50Hz/60Hz
240W(full power), 28.6W(average power)
Japan 100V/50Hz
240W(full power), 28.6W(average power)
This device has been tested and found to comply with:
CAN/CSA 60065-03 Safety Requirements.
UL std. No. 60065-2007 Safety Requirements.
Specifications
9
-10dB
ON OFF
INPUT
PRE
POST
AMP
AMP
AMP
Output Power:
MB210-II 350W@8 Ohms (internal)
500W@4 Ohms (w/extension)
MB212-II 500W@4 Ohms
MB410 500W@4 Ohms
MB115-II 200W@4 Ohms
MB112-II 200W@4 Ohms
MB110 100W@6 Ohms
Input Section:
Maximum Input Level 0.6V rms
Input Impedance 1M Ohms
Direct Output Impedance 500 Ohms
Aux-in Input Impedance 100K Ohms
Equalizer:
Bass +/-10dB@60Hz
Lo-Mid +6dB/-10dB@250Hz
Hi-Mid +6dB/-10dB@1KHz
Treble
+/-14dB @ 7KHz
Voicing Filters:
Contour +2dB@50Hz/-10dB@500Hz/
+3dB @ 7 KHz
Noise:
MB210-II -90 dB reference to 500W/350, ‘A’ weighted
MB212-II -90 dB reference to 500W, ‘A’ weighted
MB410: -90 dB reference to 500W, ‘A’ weighted
MB115-II -90 dB reference to 200W, ‘A’ weighted
MB112-II -90 dB reference to 200W, ‘A’ weighted
MB110 -90 dB reference to 100W, ‘A’ weighted
Amplifier Protection:
Full short circuit, thermal and RF protection. Stable into reactive
and mismatched loads. Five second muted warm up.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
MB110
MB112-II
6 Ohm
10” 100W
4 Ohm
12” 200W
CHAIN
OUT
CHAIN
OUT
4 BAND
EQ
4 BAND
EQ
2x
16 Ohm
10” 200W
Neo Spkr
2x
8 Ohm
12” 300W
Neo Spkr
4x
16 Ohm
10” 200W
Neo Spkr
1x
4 Ohm
15” 200W
C US
R