10
FM
All copying, even partial, of this manual is strictly forbidden
FC66003740 - Rev 01
6
OVERALL DIMENSIONS
6.1
MOUNTING PLATE DIMENSIONS
Hot water 4-pipe convector
sensor
Hot/chil
led wa
ter 2-pipe
convector sensor
Retur
n air sensor
ON/OFF electric
control board
(20/24).
Connection to stepper motor of air
outlet flap
Connect
LED Display/IR receiver
W
all-mounted cable control
Yellow/green
Auxiliary heating contact
Auxiliary cooling contact
7
WIRING DIAGRAMS
Make the electrical connections with the power supply disconnected, in accordance with current safety regulations.
Check that the mains electricity supply is compatible with the voltage shown on the unit rating plate.
Each fan coil requires an individual electric socket and a switch with a suitable safety fuse.
--------- Factory wiring
- - - - - Field wiring
Each fan coil requires an omnipolar main switch classified as overvoltage category III to be mounted on the power supply line.