Gallet PEP 801, Инструкция по эксплуатации

Страница: 25 / 44

ENG
25
/ 36
24
INSTRUCTIONS fOR USE
Your scale is fine electronic equipment. One of the things that are most difficult to weigh is
human body as it is always in motion. If you want to obtain reliable results, always try to step
with your feet at the same place on the scale and stand still. Do not move or during weighting
and if is possible use the same place for placement of weight. If possible, weigh yourself at the
same time of a day (preferably in the morning) to obtain comparable results. Remember that
excessive clothes can increase your weight as well as eating and drinking before weighing.
Short-term weight fluctuation is generally attributed to loss of liquids.
BEfORE USE
• Insert the battery into the battery compartment with correct polarity.
• Place the scales on a form, flat and even surface to ensure accuracy.
WEIGHT MEASURING
You can use this scale only for weight measuring. This is basic mode without body fat measu-
ring.
1) Step on the scales platform to switch on the product,stand still while the scales compute
your weight.
2) Your weight will be displayed and will flash twice before it is fixed.
3) When you step off the scales it will automatically switch off after 8 seconds.
4) If no weighing is carried out while 0.0 is displayed the scales will automatically switch off
after 8 seconds.
BODy fAT MEASURMENT
1. About Body fat Percentage
Body fat percentage indicates body fat proportion in body, which is a criteria to judge one is
overweight or not.
2. Testing Principle
Impedance of fat is higher than any other body tissues such as muscle, when electrical
signal of a certain frequency goes through body (BIA principle) . Based on this principle, body
fat percentage can be tested by sending an electrical signal through body.
The technology used in these scales, Bio-electrical Impedance Analysis ( BIA) is more
technologically advanced than the order Body Mass Index (BMI) method where fat % is
calculated using only height and weight .BIA technology uses 5 parameters to get a more
accurate resolution for the analysis (weight and biological resistance which are automatically
measured by the scales together with the three personal parameters entered manually - sex,
height and age).
Important:
During body fat testing, please remove shoes and socks, etc., and clear your feet, in order to
get the most accurate result.
To ensure accuracy, please test at the same time of the day
Test result may be inaccurate when the users are:
- afte r intense sport activity, overfeeding, or excessive dehydration.
- children under 6, or adults over 80;
- body building atheletes, or other occupational atheletes;
- pregnant women; Dialysis or edema patient.