Gallet GALHUM858, Инструкция по эксплуатации

Страница: 26 / 40

ENG - 26
CONTROL (fig. 1, 2)
Operation steps:
1) Take the water tank (4) out of the base (9), revolve the Valve-cap (5) by the directions of
OPEN and CLOSEN, and fill the water tank (4) with clean water (at least 300 ml, ideally
1-3.5 l). Close the Valve-cap (5), and put the water tank (4) onto the base (9) carefully.
2) Put the Nozzle (1) into the socket on top of the water tank (4).
3) Connect the main supply (11), switch on the unit (10) (NEVER RUN THE UNIT WHEN
THERE IS NO WATER IN WATER BASIN).
4) Knob for OFF / ON:
Turn the humidifier on by turning the knob clockwise, the light indicator (14) is blue and you
will hear a snapping sound. You can turn the humidifier off any time by turning the knob into
the position OFF.
5) Knob for Min / Mid / Max: intensity of water vapour
Set the mist release intensity by turning the knob. Increase it by turning the knob clockwise,
decrease by turning it counterclockwise.
6) Button Ion: When the machine stands ON, press the Ion button, it works whatever it is
humidifying the light indicator is blue. The fan motor works at the same time. If it is not
humidifying, when the Ion is off, the fan motor stops. But if it is humidifying, when the Ion is
off, the fan motor still works.
7) Protection when waterless: s soon as the water level drops below the operating minimum,
the humidifier automatically stops the production of vapour, the light indicator (14) is red.
TROUBLE SHOOTING GUIDE
In case your humidifier does not work properly, please examine your machine before asking for
maintenance service.
Trouble
Possible reasons Shooting Way
The appliance won‘t start No power supply Connect power supply
Knob info the position OFF Turning position ON
No water in water tank Fill water into water tank
Too much water in the water
basin
Pull out some water from the
water basin, closed the cover
of water tank tightly.
Mist output is set on the
lowest level
Adjust the mist output
Floater is interrupted Waver the floater, keep it free
Abnormal smell mist New unit Take out water tank, open
cover, let it stays 12 hours in
cool position
Dirty water or long time
staying water
Cleaning water tank, fill in
clear water
Mist fog is too small Too much scale in the water
basin
Clean transducer
Water is too dirty or water
kept too long time in the tank
Clean water tank, change to
fresh clear water
Water is too cold Add some warm water inside