Gallet GALFAR277, Инструкция по эксплуатации

Страница: 19 / 44

– The thermostat can never be used as a switch!
– Do not use the appliance with program, time switch or any other item, which switches ON the
appliance automatically, as there is a risk of fire, when the appliance is covered or improperly located.
– Never iron or steam iron the clothes on persons (directly on body) and do not direct the steam to any
persons or animals.
– Never immerse the appliance into water (even its parts)! Do not wash it under running water!
– Any modification of the appliance surface (e.g. by means of self-adhesive wall-paper, foil etc.)
is prohibited!
– Do not place the iron in such a way that could represent harm (e.g. fire, burn and scalding ).
– Due to production tests, the internal iron container can be misted up. Do not consider
it to be a defect when purchasing the iron.
– Never pour water to the container that was produced by defrosting of a freezer, water condensed
in a dryer, air-conditioning or dehumidifying units, certain types of mineral waters, rain-water, water
enriched with alcohol, perfume and preparations for treatment and for stiffening fabrics (e.g. starch,
fabric conditioners ) or vinegar, decalcifying agents, softeners or other chemical substances. Do not
use pure distilled water.
– When ironing, be very careful, tilting of the iron may result in the hot water pouring out of the filling hole.
– Make sure that the power cord is always dry and it is not damaged.
– Regularly check condition of the appliance power cord.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water
or bent over sharp edges. Never put it to hot surfaces, prevent its free hanging over edge of table or
work board. Touching, stumbling or pulling the power cord e.g. by children may cause tipping over or
falling of the appliance with subsequent severe injury!
– The appliance is portable and it is equipped with a movable connector with a plug which ensures
double-pole disconnection from power supply.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid
standards.
– Never use the appliance for any other purpose than for that described in these instructions for use!
– The producer is not responsible for damage caused by improper use of the appliance (e.g. burning,
scalding, fire, clothes damage, scratching and contamination of the ironing plate ) and its
guarantee for the appliance does not apply to situations when the safety warnings above have not
been complied with.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – ironing plate (*) H – thermostat regulation wheel
B – additional spray jet I – water container
C – filling hole lid J – SELF CLEAN button
D – steaming regulator K – rest board
E – additional spray button L – space for power cord wind-up
F – steam shock button M – power cord
G – control light N – handle
O – filling cup
* GALFAR277 ceramic plate, GALFAR287 stainless plate
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the iron with the accessories. Remove any labels,
protective foils or covers from the ironing plate before the first use. At first switch the iron ON to
maximum temperature and let the iron at least 10 minutes running without water . The iron may
produce slight smoke, which is cased by burning of used lubricants and seals in steam chamber. This
is normal situation and does not form the reason for warranty claim. During first filling of the tank with
operating water it is recommended to release the steam from whole tank outside the ironed fabric.
19
GB