Gallet ASP 3801 Toulon, Инструкция по эксплуатации

Страница: 25 / 32

ENG
ENG - 25
The bagless vacuum cleaner function without needing a dust bag. The sucked up dirt is forced
into the dust container by force of the air jet instead. The air is cleaned by a washable perma -
nent filter (HEPA filter) in the dust container, motor protection filter and an exhaust air filter.
Cleaning and maintenance
Always remove the power plug from the wall outlet before carrying out any maintenance.
If the suction power of your machine is getting lower, you must empty the dust container and
clean the HEPA filter. To do so, please follow the instruction below.
HOW TO EMPTY DUST CONTAINER AND REMOVE THE HEPA FILTER
You can easily see with the transparent dust container when it must be emptied.
Switch off the vacuum cleaner and disconnect the plug from the mains. To do this always
pull on the plug and not on the cable.
You can pull the dust container together with the cleaning system out of their anchoring with
the aid of the carrier handle on the dust container. Now lift out the dust container and carry it
to the waste bin.
A push button P13 is located on the dust container that you can use to open and empty it
automatically (bottom-down technology). To do this hold the dust container over your dustbin
and press on the empty button.
Carefully turn the cover of the dust collector counterclockwise to release the collector.
Remove the HEPA filter by turning it counterclockwise. Clean the filtr according to the clea -
ning instructions found in the manual.
After this push the HEPA filter cleaning system back into position in the vacuum cleaner until
it snaps into place. Your cyclone vacuum cleaner is now ready for use again.
Note:
When the dust container is full, it is sensible to pull a plastic bag over it and to empty it into this
bag. This prevents the spilling of dust.
1)
2)
3)
4)
5)