NTS-6001 WEB CONFIGURATION
www.
galsys
.co.uk
galleonsupport
.com
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477
NETWORK TAB
NETWORKING
This shows the current network settings, and allows you to customise them however you wish. To
make them active the settings must be saved to flash and the system rebooted.
Both Ethernet ports on the unit will be displayed. Port 0 (eth0) is the default primary port and Port 1
(eth1) is the secondary port.
By default eth0 will be set to DHCP and will be provided by your network, unless you configured it
manually before connecting to your network (explained in the hardware manual).
You can disable DHCP and set Static settings by changing the IP Address, the Subnet Mask, the
Gateway and Hostname for both IPv4 and IPv6 for each available network port.
You can also configure up to 2 DNS Servers, the Domain Name and appoint a Syslog Server for the
unit.
Note: Changing these settings requires the unit to be rebooted for them to take effect.
